YOKOGAWA CW240 User Manual Download Page 219

Page: 219 / 388

7-23

IM CW240E

Measurements

●

Switching the Item to be Displayed

[

Selecting the display area

Using the cursor key, select the display area to be changed

(highlighted).

[

Displaying the window

Press the F3 key (ITEM CHANGE).

The window showing the items appears.

Example of display:

[

Selecting the item

Using the cursor key, select the item to be displayed (highlighted).

If you do not change the setting, press the ESC key. The window returns to
the Zoom screen.

[

Confirmation

ENTER

Press the ENTER key.

This closes the window, returning you to the Zoom screen.

To switch the load to be displayed:

The load changes each time the F2 key is pressed.

Measured values are displayed on a load basis.

(The display varies depending on the wiring setting or the number of
loads.)

7.5 Displaying Zoom (Expanded View)

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 219 / 388

Search results

Summary of Contents for CW240

Reviews: