YOKOGAWA CW240 User Manual Download Page 240

Page: 240 / 388

7-44

IM CW240E

7.9 Checking Settings

End:

If no setting change is required

To change setting

Press the ESC key.
This returns to the Measure screen.

Press the F1 key.
The Setup screen appears.

●

Changing Settings

[

Change

Press the F1 key.

The Setup screen appears. Change the necessary item(s).

[

Setting

For the setting procedure (details), see Chapter 6, Configuring Settings.

End:

Press the ENTER key.

This returns to the Measure screen.

NOTE

• During integration measurement (including being on standby), only the fol-

lowing setting items can be changed:

LANGUAGE, BEEP, BACKLIGHT AUTO OFF, and LCD CONTRAST

• If integrated data has not be cleared, only the following setting items can be

changed:

MEASURE START (date and time), MEASURE STOP (date and time),
LANGUAGE, BEEP, BACKLIGHT AUTO OFF, and LCD CONTRAST

To change other items, you must first clear the integrated data.

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 240 / 388

Search results

Summary of Contents for CW240

Reviews: