YOKOGAWA CW240 User Manual Download Page 159

Page: 159 / 388

6-60

IM CW240E

6.4.7

Setting Up a File Name

TOP

MENU

ENTER

LIGHT

TOP

MENU

SAVE

RANGE

START

&STOP

ESC

ENTER

DISP COPY

RANGE

Displaying the Save 1/2 screen

Using the right and left cursor keys, select the Save tab (highlighted).

Entering a file name

Using the up and down cursor keys, select FILE NAME (highlighted).

Displaying the window

Press the F1 key (CHANGE).

The screen switches to an entry screen.

If you do not enter a file name, press the ESC key. The window returns to the
Save screen.

TIP

• If no file name is set, the CW240 automatically assigns a file name.

• For more information on file names, see Section 8.1, Data Save.

6.4 Save Data Settings 1/2

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 159 / 388

Search results

Summary of Contents for CW240

Reviews: