manualshive.com logo in svg

YOKOGAWA CW240, User Manual, Page: 336 / 388

Share
Download
YOKOGAWA CW240 User Manual Download Page 336

16-4

IM CW240E

16.2    Error Message Content  and

  Actions

Messages are sometimes displayed on the screen while this device is being
used.  The content and actions are described here.

16.2.1  Execution Errors

●

 Confirmation Messages

Message

Same file name already exists.  
Overwrite?

Content/Action

The same file name already exists.  

Select whether to overwrite or not.

●

 Normal Messages

Message

Cannot change name of file.

Cannot delete file.

Content/Action

The selected file is read-only.  

Change it to full-access.

Same file name already exists. 

Cannot change. 

The new file name in file name change operation 

already exists.  Change the new file name.

Error has occurred during writing

Internal memory. 

Error has occurred during writing 

PC card.

Error has occurred during print out.

Error has occurred during reading

Internal memory

Error has occurred during reading 

PC card.

PC card not yet formatted. Format it.

PC card not inserted.

Write-protect is performed.

No file.

File not yet selected.

No file is selected in file deletion or file copying.  

Select a file.

Check the internal memory.

Check the printer.

Check the PC card.

Check the internal memory.

Check the PC card.

Format the PC card to MS-DOS format.

Insert the PC card correctly.

Clear the write-protect on the storage media.

There is no file to read. The operation is invalid.

Summary of Contents for CW240





































































































































































































































































































































































































Reviews:

No comments