6-39
IM CW240E
Configuring Settings
6
●
Determining the Position of the Decimal Point and the Unit of
Measurement Automatically
The position of the decimal point and the unit of measurement are automatically
determined from the product of "rated power
⫻
VT ratio
⫻
CT ratio."
STANDARD, AUTO
SEE ALSO
For more information on STANDARD or AUTO, see Section 5.3, Ranges and Number
of Digits.
●
Setting the Position of the Decimal Point
The number of digits for electric energy indication is 6 digits.
The position of the decimal point can be fixed.
000.000 / 0000.00 / 00000.0 / 000000
In this case, the unit of electric energy needs to be set.
●
Setting the Unit of Measurement
When the position of the decimal point is fixed, select the unit of electric energy
from among the following:
mWh / Wh / kWh / MWh / GWh
TIP
The number of digits and the unit of measurement to be displayed for regenerative
energy, lagging reactive energy, and leading reactive energy are also set up in the
same way.
6.3 General Settings 2/2