YOKOGAWA CW240 User Manual Download Page 186

Page: 186 / 388

6-87

IM CW240E

Configuring Settings

[

Selecting an item

Using the right and left cursor keys, select an item to change

(highlighted).

Year / Month / Day / Hour / Minute

[

Input

Press the corresponding function key to input a value.

F1 : +

Increments a value.

F2 : –

Decrements a value.

Repeat steps

䊏

and

䊏

to set year/month/day/hour/minute data.

[

Setup

Press this function key to complete the setting.

This causes the date and time data at the upper right of the screen to be
updated.

Ending setup:

To also change another setting

To return to the Top Menu

Select a desired setting using the cursor keys. ENTER key

TIP

The setting range of the date and time is from 2000/01/01 0:00 to 2099/12/31 23:59.

Even if a system reset is made, the date and time settings are not reset to the factory-
shipped settings.

6.8 Hardware Settings

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 186 / 388

Search results

Summary of Contents for CW240

Reviews: