manualshive.com logo in svg

YOKOGAWA CW240, User Manual, Page: 261 / 388

Share
Download
YOKOGAWA CW240 User Manual Download Page 261

8-16

IM CW240E

8.5  Copying Screen Data (Hard copy)

NOTE

• Please set up copying destination (HARD COPY) on Save 1/2 screen.

• When using printer (optional), RS-232 connection destination (CONNECT)  need

to be set to Printer on Communication screen beforehand.

• The F3 key (PRINTER) function indication is not shown if the setting of the RS-

232 connection destination is not set to PRINTER.

• When HARD COPY is set to PC CARD or MEMORY, the CW240 automatically

assigns a file name.

Screen data file: 240MDXXX.BMP (XXX: 000 to 029), bitmap data

• Screen data cannot be copied during integration measurement (including be-

ing on standby). The DISP COPY key is disabled during this period.

Summary of Contents for CW240





































































































































































































































































































































































































Reviews:

No comments