7-45
IM CW240E
Measurements
7
7.10 Clearing Integrated Data
To conduct new integration measurements or change a set value after
completing an integration measurement, you need to clear the integrated data
(integrated values) stored in the CW240. To clear integrated data (with the
exception of wiring diagrams), press the F5 key on a Measure screen.
TOP
MENU
ENTER
ENTER
LIGHT
TOP
MENU
SAVE
A
RANGE
START
&STOP
ESC
ENTER
F
1
F
2
F
3
F
4
F
5
DISP COPY
RANGE
F
1
This section describes the integrated data-clearing procedure taking the
Integrate screen as an example.
[
1
Check
If integrated data has been saved in the CW240, the F5 key function indication shows
HOLD/Clear.
(If no integrated data has been saved, the F5 shows HOLD only.)
[
2
Clear
F
5
Press the F5 key for more than 3 seconds.
A message asking if you want to clear integrated data appears.
(When a clear is completed, the F5 display item changes to "HOLD.")
TIP
• When showing HOLD only, the F5 key alternately selects HOLD and CANCEL each
time it is pressed.
• If you cannot change the setting conditions (set values), check if the previous inte-
grated data is still saved and if so, clear it.