YOKOGAWA CW240 User Manual Download Page 222

Page: 222 / 388

7-26

IM CW240E

7.6 Measuring Harmonics

7.6.1 Displaying a List

●

Displaying the List Screen

TOP

MENU

ENTER

LIGHT

TOP

MENU

SAVE

RANGE

START

&STOP

ESC

ENTER

DISP COPY

RANGE

[

Displaying the Measure screen

Press the F1 key (DISPLAY CHANGE).

The window for switching the screen appears.

[

Selecting a list

Using the cursor key, select HARMONIC (highlighted).

Press the right direction cursor key to move to the Harmonic window.

Select LIST (highlighted) using the up and down direction cursor key.

[

Confirmation

ENTER

Press the ENTER key.

The List screen appears.

Description of the Function Keys:

DISPLAY CHANGE

Switches the Measure screen.

CH CHANGE

Switches the element to be measured.

ORDER CHANGE

Switches the order of harmonic to be displayed.
ALL ORD. (1st to 50th)/ODD ORD.

—

HOLD

Holds or cancels a displayed screen.

HOLD/Clear

If there is integrated data, press the F5 key for more than 3
seconds to clear it as necessary.

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 222 / 388

Search results

Summary of Contents for CW240

Reviews: