YOKOGAWA CW240 User Manual Download Page 309

Page: 309 / 388

11-4

IM CW240E

11.3 Formatting the PC Card

New PC cards are formatted using file processing.

TOP

MENU

ENTER

LIGHT

TOP

MENU

SAVE

RANGE

START

&STOP

ESC

ENTER

DISP COPY

RANGE

[

Selecting the object to format.

Press the F2 key.

(The PC card will be formatted.)

MEMORY

PC CARD

[

Message Display

Confirmation message for format is appears.

<End>

To format

To cancel formatting

Press the ENTER key.
Formatting begins.
When formatting has been completed, the
display returns to the top screen of file
processing.

Press the ESC key.
Formatting is not performed, and the
display returns to the top screen of file
processing.

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 309 / 388

Search results

Summary of Contents for CW240

Reviews: