manualshive.com logo in svg

YOKOGAWA CW240, User Manual, Page: 330 / 388

Share
Download
YOKOGAWA CW240 User Manual Download Page 330

15-3

IM CW240E

Other Functions

15

15.2  Turning the LCD Backlight ON

and OFF

●

 Turning the LCD Backlight ON

<Turning the light ON>

LIGHT

Press the LIGHT key.

The LCD backlight is lit.

The backlight will also be lit if the LIGHT key is pressed when the backlight
has been turned off by the auto-off function.

<Turning the light OFF>

Press the LIGHT key when the light is ON.

The LCD backlight will go OFF.

●

 LCD Backlight Auto-off Function

This function automatically turns the LCD backlight OFF when there has been
no key operation for 10 minutes or more while the LCD backlight is lit. (Set with
hardware.)

TOP

MENU

ENTER

LIGHT

TOP

MENU

SAVE

A

RANGE

START

&STOP

ESC

ENTER

F

1

F

2

F

3

F

4

F

5

DISP COPY

RANGE

ENTER

[

1

Displaying the Hardware screen

Using the right and left cursor keys, select the Hardware tab

 (highlighted).

Using the up and down cursor keys, select BACKLIGHT AUTO OFF.

[

2

Setup

F

1

F

1

 , 

F

2

Press the corresponding function key to activate/deactivate auto

 backlight OFF.

F1 : ON

Activates auto backlight OFF if no key is pressed for more than

10 minutes.

F2 : OFF Lets the backlight remain ON.

Summary of Contents for CW240





































































































































































































































































































































































































Reviews:

No comments