6-46
IM CW240E
6.4
Save Data Settings 1/2
The Save 1/2 screen allows you to set up the following items.
Setting Item
Description
Integration start time
MANUAL/TIME/JUST
When TIME is selected, you can set the integration start time.
Sets the integration stop method.
MANUAL/TIME/TIMER
When TIME is selected, you can set the integration stop time.
Sets data save (output) time.
For demand measurement, demand interval is set.
Sets the device to which measured data is saved.
PC CARD/MEMORY
Sets the device to which a display screen is hard copied.
PC CARD/MEMORY/PRINTER
Used to enter a file name under which data is saved.
MEASURE START
Integration start time
Integration stop time
MEASURE STOP
INTERVAL TIME
DATA SAVE
HARD COPY
FILE NAME
NOTE
• Setting items cannot be changed during integration measurements (including
when on standby).
• Unless integral measured data has been cleared, the interval time and file name
cannot be changed. To change a setting item, press the F5 key (HOLD/Clear)
for more than 3 seconds on the Measure screen to clear integral measured
data and then change the setting.