YOKOGAWA CW240 User Manual Download Page 179

Page: 179 / 388

6-80

IM CW240E

6.8.2

Setting Up ON/OFF of a Beep

TOP

MENU

ENTER

LIGHT

TOP

MENU

SAVE

RANGE

START

&STOP

ESC

ENTER

DISP COPY

RANGE

Displaying the Hardware screen

Using the right and left cursor keys, select the Hardware tab

(highlighted).

Changing a beep

Using the up and down cursor keys, select BEEP (highlighted).

The function key labels change.

OFF

Default: ON

Setup

Press the corresponding function key to set ON/OFF of a beep.

F1: ON

A beep is generated each time a key is pressed.

F2: OFF

Disables generation of a beep.

Ending setup:

To also change another setting

To return to the Top Menu

Select a desired setting using the cursor keys. ENTER key

6.8 Hardware Settings

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 179 / 388

Search results

Summary of Contents for CW240

Reviews: