6-88
IM CW240E
6.9
Analog I/O Settings
The CW240 has 4-channel analog output (DA output) and 2-channel analog
input functions (optional).
For analog output, set up the measured value output on each channel (CH). For
analog input, set up the voltage range of each channel (CH).
TOP
MENU
ENTER
ENTER
LIGHT
TOP
MENU
SAVE
A
RANGE
START
&STOP
ESC
ENTER
F
1
F
2
F
3
F
4
F
5
DISP COPY
RANGE
[
1
Displaying the Analog I/O Screen
Using the right and left cursor keys, select the Analog I/O tab
(highlighted).
NOTE
• Setting items cannot be changed during integration measurements (including
when on standby).
• Unless integral measured data has been cleared, setting items cannot be
changed. To change a setting item, press the F5 key (HOLD/Clear) for more
than 3 seconds on the Measure screen to clear integral measured data and
then change the setting.
SEE ALSO
For more information on analog input/output, see Chapter 13, Using Analog Input/
Output (Options).