YOKOGAWA CW240 User Manual Download Page 259

Page: 259 / 388

8-14

IM CW240E

8.4 Backup Memory

• If integration measurement has been completed when the PC card is full or

extracted, you need to take the following steps:

If the data in the backup memory is required,

copy backup data.

• Backup data can be copied on the File screen.

See Section 9.7, Backup Memory Copy.

If none of the data in the backup memory is required,

delete backup data.

• Backup data can be deleted on the File screen.

See Section 9.8, Backup Memory Delete.

• You can start new integration to delete backup data.

Starting a new integration measurement causes data in the backup memory

to be deleted.

TOP

MENU

ENTER

LIGHT

TOP

MENU

SAVE

RANGE

START

&STOP

ESC

ENTER

DISP COPY

RANGE

NOTE

It is recommended that even if DATA SAVE is set to PC CARD, file(s) in the

internal memory be deleted before starting an integration measurement to se-

cure the memory space for backup.

If the internal memory becomes full, data cannot be backed up in the event of a

failure to save data in a PC card.

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 259 / 388

Search results

Summary of Contents for CW240

Reviews: