YOKOGAWA CW240 User Manual Download Page 157

Page: 157 / 388

6-58

IM CW240E

6.4.6

Setting Up the Hard Copy Destination

The DISP COPY key allows you to hard copy a display screen.
This section explains how to set up the hard copy destination.

TOP

MENU

ENTER

LIGHT

TOP

MENU

SAVE

RANGE

START

&STOP

ESC

ENTER

DISP COPY

RANGE

Displaying the Save 1/2 screen

Using the right and left cursor keys, select the Save tab (highlighted).

Changing the hard copy destination

Using the up and down cursor keys, select HARD COPY

(highlighted).

The function key labels change.

PC CARD

MEMORY

PRINTER

Default: PC CARD

6.4 Save Data Settings 1/2

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 157 / 388

Search results

Summary of Contents for CW240

Reviews: