manualshive.com logo in svg

YOKOGAWA CW240, User Manual, Page: 285 / 388

Share
Download
YOKOGAWA CW240 User Manual Download Page 285

9-24

IM CW240E

9.7

Backup Memory Copy

If data cannot be written to the PC card for any reason, it will be saved in the
backup memory.
When the backup memory contains data, the relevant 

 mark is displayed on

the screen.
A file in the backup memory can be copied to the PC card.

TOP

MENU

ENTER

ENTER

LIGHT

TOP

MENU

SAVE

A

RANGE

START

&STOP

ESC

ENTER

F

1

F

2

F

3

F

4

F

5

DISP COPY

RANGE

1

Copy

Confirmation message for copy appears.

End:

To copy a file

To cancel a copy

Press the ENTER key. 
A file is copied to the PC card, letting 
the screen return to the top File screen.

Press the ESC key. 
The screen returns to the top File screen 
without making copy. 

SEE ALSO

For more information on the backup memory, see Section 8.4, Backup Memory.

Summary of Contents for CW240





































































































































































































































































































































































































Reviews:

No comments