YOKOGAWA CW240 User Manual Download Page 218

Page: 218 / 388

7-22

IM CW240E

TOP

MENU

ENTER

LIGHT

TOP

MENU

SAVE

RANGE

START

&STOP

ESC

ENTER

DISP COPY

RANGE

[

Selection

Using the cursor key, select ZOOM (highlighted).

The Zoom screen appears.

[

Confirmation

ENTER

Press the ENTER key to confirm it.

Description of the Function Keys:

DISPLAY CHANGE

Switches the Measure screen.

LOAD CHANGE

Switches the load to be displayed. (For multiple loads)

ITEM CHANGE

Changes the item to be measured that is zoomed.

ITEM CHANGE

Displays the Setting Check screen.

HOLD

Holds or cancels a displayed screen.

HOLD/Clear

If there is integrated data, press the F5 key for more than 3

seconds to clear it as necessary.

7.5 Displaying Zoom (Expanded View)

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 218 / 388

Search results

Summary of Contents for CW240

Reviews: