YOKOGAWA CW240 User Manual Download Page 329

Page: 329 / 388

15-2

IM CW240E

15.1 Holding the Display Value

The display screen (display values) are held when the F5 (HOLD) key is
pressed during measurement.

LIGHT

TOP

MENU

SAVE

RANGE

START

&STOP

ESC

ENTER

DISP COPY

RANGE

<Hold>

Press the HOLD (F5) key.

The display screen is held.

is displayed at the top middle of the screen during the hold.

Press the HOLD (F5) key in hold status.

Hold will be cleared.

TIP

• Measurement (internal operation) is performed during hold.

• HOLD/CLEAR is displayed when integration data (integration values) has been saved.

The integration values are cleared if the F5 key is pressed continuously for 3 sec-
onds or longer.

• Setting confirmation cannot be performed during hold.

• When saving (printing) the screen with the DISP COPY key, it is recommended that

the save (print) be done after holding the display value with the hold function.

Chapter 15 Other Functions

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 329 / 388

Search results

Summary of Contents for CW240

Reviews: