YOKOGAWA CW240 User Manual Download Page 189

Page: 189 / 388

6-90

IM CW240E

●

Analog Output Item Setting Procedure

[

Changing an item

Using the up and down cursor keys, select an item of CH to be

changed (highlighted).

[

Displaying the window

Press the F1 key (CHANGE).

The window showing analog output items appears.

THD

Total Value

Harmonic PA

Content

Level

E. Energy

Normal Measure

Default: Normal Measure

[

Selecting an item

Using the cursor keys, select a desired analog output item

(highlighted).

To cancel changing the setting, press the ESC key. The window returns to the
Analog I/O screen.

6.9 Analog I/O Settings

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 189 / 388

Search results

Summary of Contents for CW240

Reviews: