YOKOGAWA CW240 User Manual Download Page 323

Page: 323 / 388

13-7

IM CW240E

Using Analog Input/Output (Optional)

13.2.3 Setting Analog Input

Settings are made on the analog I/O screen.

TOP

MENU

ENTER

LIGHT

TOP

MENU

SAVE

RANGE

START

&STOP

ESC

ENTER

DISP COPY

RANGE

ENTER

[

Displaying the Analog I/O Screen

Using the right and left cursor keys, select the Analog I/O tab

(highlighted).

[

Changing the range

Using the up and down cursor keys, select CH1 (highlighted).

The function key labels change.

100mV

Default: 100 mV

[

Setting a range.

Press the corresponding function key to set the range.

Repeat steps

䊏

and

䊏

to set CH2.

Ending setup:

To also change another setting: To return to the Top Menu: To switch to the measurement screen

Select a desired setting using the cursor keys. ESC key

ENTER key

SEE ALSO

For more information on the setting method, see Section 6.9, Analog I/O Settings.

13.2 Analog Input

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 323 / 388

Search results

Summary of Contents for CW240

Reviews: