YOKOGAWA CW240 User Manual Download Page 265

Page: 265 / 388

9-4

IM CW240E

9.2

Changing a File Name

In this section, change the name of a saved file.

TOP

MENU

ENTER

LIGHT

TOP

MENU

SAVE

RANGE

START

&STOP

ESC

ENTER

DISP COPY

RANGE

Selecting the save destination

Using the relevant function key, select the media to which a file is

saved.

F1: Changes a file name in the internal memory.

F2: Changes a file name in a PC card.

MEMORY

PC CARD

Selecting a file

A list of files that have been saved appears.

Using the cursor key, select the file whose name is changed (highlighted).

Confirmation

ENTER

Press the ENTER key.

The screen switches to the file name entry screen.

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 265 / 388

Search results

Summary of Contents for CW240

Reviews: