YOKOGAWA CW240 User Manual Download Page 149

Page: 149 / 388

6-50

IM CW240E

6.4.2

Setting Up the Integration Stop Method

TOP

MENU

ENTER

LIGHT

TOP

MENU

SAVE

RANGE

START

&STOP

ESC

ENTER

DISP COPY

RANGE

Displaying the Save 1/2 screen

Using the right and left cursor keys, select the Save tab (highlighted).

Changing the integration stop method

Using the up and down cursor keys, select MEASURE STOP

(highlighted).

The function key labels change.

MANUAL TIME TIMER

Default: MANUAL

Setup

Press the corresponding function key to set the integration stop

method.

F1: Stops integration if the START&STOP key is pressed during integral

measurement.

F2: Sets the integration stop time. (Integration stops at the set time.)

F3: Stops integration when the set time elapses.

Ending setup:

To also change another setting

To return to the Top Menu

Select a desired setting using the cursor keys. ENTER key

6.4 Save Data Settings 1/2

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 149 / 388

Search results

Summary of Contents for CW240

Reviews: