YOKOGAWA CW240 User Manual Download Page 147

Page: 147 / 388

6-48

IM CW240E

●

JUST

On the hour

Waiting for
integration to start

(STANDBY)

Interval time

START

&STOP

Start of

integration

●

Setting the Start Time

After selecting the time in the integration start method, enter the start time.

Changing the time

Using the cursor keys, select DATE AND TIME (highlighted).

The function key labels change.

–

Selecting items

Using the right and left cursor keys, select a desired item

(highlighted).

Year / Month / Day / Hour / Minute

Setup

Press the corresponding function key to set the integration start

time.

F1: + Increments a value.

F2: – Decrements a value.

Repeat steps

䊏

and

䊏

to set year/month/day/hour/minute data.

Ending setup:

To also change another setting

To return to the Top Menu

Select a desired setting using the cursor keys. ENTER key

6.4 Save Data Settings 1/2

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 147 / 388

Search results

Summary of Contents for CW240

Reviews: