YOKOGAWA CW240 User Manual Download Page 237

Page: 237 / 388

7-41

IM CW240E

Measurements

●

Displaying the Volt. Quality Screen

TOP

MENU

ENTER

LIGHT

TOP

MENU

SAVE

RANGE

START

&STOP

ESC

ENTER

DISP COPY

RANGE

[

Displaying the Measure screen

Press the F1 key (DISPLAY CHANGE).

The window for switching the screen appears.

[

Selecting voltage quality

Using the cursor key, select VOLT. QUALITY (highlighted).

[

Confirmation

ENTER

Press the ENTER key to confirm it.

The Volt. Quality screen appears.

Description of the Function Keys:

DISPLAY CHANGE

Switches the Measure screen.

Lets you manually save/print measured data.

–

ITEM CHANGE

SAVE

–

Switches the item under test.

ALL, SWELL, DIP, and INST.

HOLD

Holds or cancels a displayed screen.

HOLD/Clear

If there is integrated data, press the F5 key for more than 3

seconds to clear it as necessary.

7.8 Measuring Voltage Quality (Voltage Dip, Voltage Swell, or Instantaneous Interruption)

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 237 / 388

Search results

Summary of Contents for CW240

Reviews: