YOKOGAWA CW240 User Manual Download Page 270

Page: 270 / 388

9-9

IM CW240E

Processing File(s)

9.4

Formatting

In this section, format the internal memory or PC card.

TOP

MENU

ENTER

LIGHT

TOP

MENU

SAVE

RANGE

START

&STOP

ESC

ENTER

DISP COPY

RANGE

Selecting the media to be formatted

Press the relevant function key to select the media to be formatted.

F1: Formats the internal memory.

F2: Formats the PC card.

MEMORY

PC CARD

Displaying a message

Confirmation message for format appears.

End:

To perform formatting

To cancel formatting

Press the ENTER key.
Formatting starts.
When it is complete, the screen returns to the
top File screen.

Press the ESC key.
The screen returns to the top File screen
without formatting.

NOTE

• To use a new PC card, you need to format it.

• When a media is formatted, all files contained in it will be deleted.

Note that a deleted file cannot be recovered.

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 270 / 388

Search results

Summary of Contents for CW240

Reviews: