manualshive.com logo in svg

YOKOGAWA CW240, User Manual, Page: 304 / 388

Share
Download
YOKOGAWA CW240 User Manual Download Page 304

10-18

IM CW240E

10.3  Using a Printer

10.3.5 Screen Data Copy

In this subsection, press the DISP COPY key to print display screen data on the
printer. (Hard copy)
For this, settings for printing on the printer (COMMUNICATION, SAVE) need to
be made.

●

Setting

TOP

MENU

ENTER

ENTER

LIGHT

TOP

MENU

SAVE

A

RANGE

START

&STOP

ESC

ENTER

F

1

F

2

F

3

F

4

F

5

DISP COPY

RANGE

1

Setting on the Communication screen

Using the right and left direction cursor key, select the

Communication tab (highlighted).

• RS-232 CONNECT is set to PRINTER.

• Configure settings required for communication with the printer.

2

Setting on the Save 1/2 screen

Using the right and left direction cursor key, select the Save tab

(highlighted).

Set HARD COPY to PRINTER.

Set HARD COPY
to PRINTER

Summary of Contents for CW240





































































































































































































































































































































































































Reviews:

No comments