YOKOGAWA CW240 User Manual Download Page 106

Page: 106 / 388

6-7

IM CW240E

Configuring Settings

6.2 General Settings 1/2

[

Displaying the General 1/2 screen

Using the right and left cursor keys, select the General tab

(highlighted).

[

Changing Wiring

Using the up and down cursor keys, select WIRING (highlighted).

[

Displaying the window

Press the F1 key (CHANGE).

The window for selecting wiring appears.

3P3W+1P3W

3P4W4I

3P4W

3P3W3I

3P3W2I

1P3W3I

1P3W

1P2W

Scott connection

Three-phase four-wire four-current

Three-phase four-wire

Three-phase three-wire three-current

Three-phase three-wire two-current

Single-phase three-wire three-current

Single-phase three-wire

Single-phase two-wire

Default: 3P3W2I

[

Selecting wiring

Using the cursor keys, select a desired wiring (highlighted).

To cancel changing the setting, press the ESC key. The window returns to
the General screen.

[

Confirmation

ENTER

Press the ENTER key.

This closes the window, returning you to the General screen.

The selected wiring is displayed on the screen.

Ending setup:

To also change another setting

To return to the Top Menu

Select a desired setting using the cursor keys. ENTER key

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 106 / 388

Search results

Summary of Contents for CW240

Reviews: