manualshive.com logo in svg

YOKOGAWA CW240, User Manual, Page: 175 / 388

Share
Download
YOKOGAWA CW240 User Manual Download Page 175

6-76

IM CW240E

6.8

Hardware Settings

The Hardware screen allows you to set up the following items.

Setting Item

Description

LANGUAGE

BEEP

BACKLIGHT AUTO OFF

LCD CONTRAST

ZERO CROSS FILTER

ID NUMBER

DATE AND TIME

Sets the display language such as English, Japanese, etc. 

Sets whether to generate a beep when an operation key is pressed. 

Sets whether to activate automatic backlight OFF if no key is
pressed for morethan 10 minutes. 

Sets LCD contrast (1 to 8).

Sets whether to insert a zero cross filter into the frequency circuit.

Sets an ID number (001 to 999) as an instrument number or 
the number of a measurer, etc. 

Sets date and time (accurate time entry). 

The General 2/2 screen allows you to set up the zero cross filter.
For more information on the zero cross filter, see Section 6.3, General Settings 2/2, and to set up
the filter, see 6.8.5, Setting Up ON/OFF of a Zero Cross Filter.

Summary of Contents for CW240





































































































































































































































































































































































































Reviews:

No comments