YOKOGAWA CW240 User Manual Download Page 337

Page: 337 / 388

16-5

IM CW240E

Maintenance Troubleshooting

Message

Maximum number in PC card

exceeded.

Content/Action

The number of saved files has exceeded 30. Delete

unnecessary files from the PC card.

Not flash ATA card.

The inserted PC card is not flash ATA. Insert a flash

ATA memory card.

PC card not supported.

An unsupported flash ATA memory card has been

inserted. Insert a supported card.

Error relating to the PC card has

occurred.

A PC card-related error other than the above has

occurred. Check the PC card.

Maximum number in setting file

exceeded.

The number of saved setting files has exceeded 30

(5 in the case of internal memory). Delete

unnecessary files.

Internal memory exceeds capacity.

The capacity of the internal memory has been

reached. Delete unnecessary files.

Maximum number in internal memory

exceeded.

The number of files saved in the internal memory has

exceeded 30. Delete unnecessary files.

No saved data in backup memory.

Backup memory copy or backup memory delete was

selected when there is no data saved in the backup

memory. This operation is not required.

Backup memory exceeds capacity.

The backup memory is full. Delete data from the

backup memory.

Correct wiring.

Confirm that connections have been made correctly,

using Scott connection confirmation.

1P3W load connection is

different from setting. It may

connect to R-S (example).

Check setup of 1P3W load

Connection.

It is possible that Scott connection confirmation is not

correct. Check the connections and the CW240

settings.

Failure in saving data within

output interval time.

It becomes easy for this problem to occur when there

are many files in the save destination or when the file

capacity is large. Check the save destination memory.

Start time has passed. Start

Integration measurement by

JUST start.

The START&STOP key was pressed after the set start

time had passed. Start integration measurement with

JUST start.

Stop time is over. End

measurement by hand.

The START&STOP key was pressed after the set stop

time had passed. Start integration measurement.

Also, stopping is done manually. Press the

START&STOP key to stop integration measurement.

The SAVE key or the DISP COPY key was pressed

during integration measurement. Perform saves and

screen copies after integration measurement has ended.

Invalid key operation during

integration measurement.

PC card exceeds the capacity.

Delete unnecessary files from the PC card.

16.2 Error Message Content and Actions

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 337 / 388

Search results

Summary of Contents for CW240

Reviews: