manualshive.com logo in svg

YOKOGAWA CW240, User Manual, Page: 286 / 388

Share
Download
YOKOGAWA CW240 User Manual Download Page 286

9-25

IM CW240E

Processing File(s)

9

9.8

Backup Memory Delete

In this section, a file is deleted from the backup memory.

TOP

MENU

ENTER

ENTER

LIGHT

TOP

MENU

SAVE

A

RANGE

START

&STOP

ESC

ENTER

F

1

F

2

F

3

F

4

F

5

DISP COPY

RANGE

1

Deletion

Confirmation message for delete appears.

End:

To delete a file

To cancel deletion

Press the ENTER key. 
A file is deleted from the backup memory, 
letting the screen return to the top File screen.

Press the ESC key. 
The screen returns to the top File screen 
without making a deletion. 

NOTE

Be aware that a deleted file cannot be recovered.

TIP

Note that starting a new integration measurement causes data in the backup memory
to be deleted.

SEE ALSO

For more information on the backup memory, see Section 8.4, Backup Memory.

Summary of Contents for CW240





































































































































































































































































































































































































Reviews:

No comments