manualshive.com logo in svg

YOKOGAWA CW240, User Manual, Page: 305 / 388

Share
Download
YOKOGAWA CW240 User Manual Download Page 305

10-19

IM CW240E

Using the Communication Function (RS-232)

10

10.3  Using a Printer

●

Measurement/Display Screen Printout

1

To the Measure screen

The Measure screen is displayed.

The following paragraph describes the screen data-printing procedure
taking the Power screen as an example.

TOP

MENU

ENTER

ENTER

LIGHT

TOP

MENU

SAVE

A

RANGE

START

&STOP

ESC

ENTER

F

1

F

2

F

3

F

4

F

5

DISP COPY

RANGE

F

1

It is recommended that when printing display screen data, press the F5 key to
hold the readings and then press the DISP COPY key to save them.

2

Copying screen data

DISP COPY

Press the DISP COPY key.

This causes currently displayed screen data to be printed out on the
printer.

The 

 mark flashes on the printer during printing.

NOTE

• If RS-232 CONNECT is set to PRINTER, the 

 mark is indicated on the screen.

• During integration measurement (including being on standby), screen data

cannot be printed out on the printer.

SEE ALSO

For the setting procedure, see Chapter 6, Configuring Settings.

For more information on data save, see Chapter 8, Saving Measured Data, and
Section 8.5, Copying Screen Data (Hard copy).

Summary of Contents for CW240





































































































































































































































































































































































































Reviews:

No comments