YOKOGAWA CW240 User Manual Download Page 162

Page: 162 / 388

6-63

IM CW240E

Configuring Settings

6.5.1

Setting Procedure

TOP

MENU

ENTER

LIGHT

TOP

MENU

SAVE

RANGE

START

&STOP

ESC

ENTER

DISP COPY

RANGE

Displaying the Save 1/2 screen

Using the right and left cursor keys, select the Save tab (highlighted).

Displaying the Save 2/2 screen

Using the up and down cursor keys, display the Save 2/2 Screen.

Changing the setting

Using the up and down cursor keys, select a necessary item

(highlighted).

The function key labels change.

OFF

Default: ON

Setup

Press the corresponding function key to set the selected item.

F1: ON

Enables a save/print.

F2: OFF Disables a save/print.

Ending setup:

To also change another setting

To return to the Top Menu

Select a desired setting using the cursor keys. ENTER key

6.5 Save Data Settings 2/2

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 162 / 388

Search results

Summary of Contents for CW240

Reviews: