YOKOGAWA CW240 User Manual Download Page 206

Page: 206 / 388

7-10

IM CW240E

7.2.4

Displaying the Power Screen

●

Displaying the Power Screen

TOP

MENU

ENTER

LIGHT

TOP

MENU

SAVE

RANGE

START

&STOP

ESC

ENTER

DISP COPY

RANGE

[

Selection

Using the cursor key, select POWER (highlighted).

[

Confirmation

ENTER

Press the ENTER key to confirm it.

The Power screen appears.

Description of the Function Keys:

DISPLAY CHANGE

Switches the Measure screen.

LOAD CHANGE

Switches the load to be displayed. (For multiple loads)

ITEM CHANGE

Switches between instantaneous, average, maximum, and minimum values.

SETTING CHECK

Displays the Setting Check screen.

HOLD

Holds or cancels a displayed screen.

HOLD/Clear

If there is integrated data, press the F5 key for more than 3 seconds

to clear it as necessary.

7.2 Measure Screens

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 206 / 388

Search results

Summary of Contents for CW240

Reviews: