manualshive.com logo in svg

YOKOGAWA CW240, User Manual, Page: 152 / 388

Share
Download
YOKOGAWA CW240 User Manual Download Page 152

6-53

IM CW240E

Configuring Settings

6

6.4.3

Precautions for Selecting the Interval Time

Standard Interval

1 wave
100ms
200ms
500ms

1sec
2sec
5sec
10sec
15sec
30sec

1min
2min
5min
10min
15min
30min
60min

Short-time Interval 

When making demand measurement, note the following:

• A demand interval of demand measurements is common to the interval time.

If the interval time is set to a value less than short-time interval (less than
1 sec.), the demand measured value cannot be displayed (the symbol "----"
appears).

When saving (outputting) data with the interval time set to 2 min or less,
note the following:

• There may be cases where data is missed at the start depending on the

number of files or space in a PC card. Set up the starting date and time with
allowances.

• As the number of data increases, there are cases where data is missed in

saved data.

• When using the CW240, especially when a short-time interval is set, note the

following:

Ensure there is no file in the PC card. (Format the PC card.)
Start integration with a PC card inserted in the CW240.
Do not remove the PC card from the CW240 during integral measurement.
Do not perform communication.
Do not operate the operation keys excessively.

If the interval time is set to 30 sec or less, note the following:

• If RS-232 CONNECT has been set to PRINTER, change the setting to PC.

(The 

M

 mark appears.)

• If HARD COPY has been set to PRINTER, change the setting to PC card.
• Note that automatic output of harmonic measured data or waveform data, or

automatic printout of it to a printer, is not possible.

If the interval time is set to a short-time interval, note the following:

• For interval time-basis outputs during integration measurement, only

instantaneous values of the normal measurement data are output.

• Files are generally created in a binary format. If a file is to be read by

spreadsheet software, etc., conversion to a text file is required. (For
conversion software, see the CD-ROM provided for the CW240.)

6.4  Save Data Settings 1/2

Summary of Contents for CW240





































































































































































































































































































































































































Reviews:

No comments