YOKOGAWA CW240 User Manual Download Page 24

Page: 24 / 388

2-3

IM CW240E

Part Names and How to Use Parts

2.2

Operation Keys

LIGHT

RANGE

TOP

MENU

RANGE

START

&STOP

SAVE

ESC

ENTER

DISP COPY

Hard-copies information displayed on the screen.

Copy destination setting: PC card, internal memory, or printer

Functional Description

Key Name

Function keys

These are setting keys corresponding to the information displayed

in the bottom of the screen.

START & STOP key

Starts/stops integration measurements.

LIGHT key

Turns the backlight ON/OFF.

When held down for more than 3 seconds, it locks or unlocks the

operation keys.

TOP MENU key

Switches the display screen to the Top Menu.

ESC key

ENTER key

Cancels setup conditions or other data.

Confirms setup conditions or other data.

Cursor key

Moves the cursor to the item you wish to select.

U RANGE key

Changes the voltage range.

A RANGE key

Changes the current range.

SAVE key

Manually save or print measured data.

DISP COPY key

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 24 / 388

Search results

Summary of Contents for CW240

Reviews: