YOKOGAWA CW240 User Manual Download Page 139

Page: 139 / 388

6-40

IM CW240E

6.3.7

Setting Up the THD Measuring Method

THD stands for Total Harmonic Distortion.
There are two types of total harmonic distortion calculation method, either of
which can be selected.

1. With reference to fundamental wave (THD-F)
2. With reference to total rms values (THD-R)

TOP

MENU

ENTER

LIGHT

TOP

MENU

SAVE

RANGE

START

&STOP

ESC

ENTER

DISP COPY

RANGE

[

Displaying the General 1/2 screen

Using the right and left cursor keys, select the General tab

(highlighted).

[

Displaying the General 2/2 screen

Using the up and down cursor keys, display the General 2/2 screen.

[

Changing the reference

Using the up and down cursor keys, select THD MEASURE METHOD

(highlighted).

The function key labels change.

THD-F

THD-R

Default: THD-F

6.3 General Settings 2/2

Summary of Contents for CW240





































































































































































































































































































































































































Search results

Summary of Contents for CW240

Reviews:

YOKOGAWA CW240, User Manual, Page: 139 / 388

Search results

Summary of Contents for CW240

Reviews: