Yamaha YZ450F(S), Owner'S Service Manual

Page: 210 / 642

3 - 32
INSP
ADJ
DRIVE CHAIN SLACK ADJUSTMENT
5. Install:
●
Drive chain 1
●
Joint 2
●
Master link clip 3
CAUTION:
Be sure to install the master link clip to the
direction as shown.
a
Turning direction
6. Lubricate:
●
Drive chain
Drive chain lubricant:
SAE 10W-30 motor oil or suit-
able chain lubricants
New
DRIVE CHAIN SLACK ADJUSTMENT
1. Elevate the rear wheel by placing the
suitable stand under the engine.
2. Check:
●
Drive chain slack
a
Above the seal guard installation bolt.
Out of specification
→
Adjust.
NOTE:
Before checking and/or adjusting, rotate the
rear wheel through several revolutions and
check the slack several times to find the tight-
est point. Check and/or adjust chain slack with
rear wheel in this “tight chain” position.
Drive chain slack:
40 ~ 50 mm (1.6 ~ 2.0 in)