4 - 66
ENG
BALANCER
ASSEMBLY AND INSTALLATION
Balancer shaft, balancer shaft drive gear
and balancer shaft driven gear
1. Install:
• Balancer shaft
1
NOTE:
• Apply the engine oil on the bearing.
• When installing the balancer shaft, align the
center
a
of the balancer shaft weight along
the line connecting the centers of the crank-
shaft and balancer shaft.
2. Install:
• Balancer shaft driven gear
1
NOTE:
Install the balancer shaft driven gear onto the
balancer shaft while aligning the punch mark
a
on the balancer shaft driven gear with the
lower spline
b
on the balancer shaft end.
3. Install:
• Balancer shaft drive gear
1
NOTE:
• Align the punched mark
a
on the balancer
shaft drive gear with the punched mark
b
on
the balancer shaft driven gear
2
.
• Align the punched mark
c
on the balancer
shaft drive gear with the lower spline
d
on
the crankshaft end.
4. Install:
• Lock washer
1
• Nut (balancer shaft driven gear)
2
• Primary drive gear
3
• Nut (primary drive gear)
4
NOTE:
• Install the primary drive gear with its stepped
side
a
facing the engine.
• Place an aluminum plate
b
between the
teeth of the balancer shaft drive gear
5
and
driven gear
6
.
5. Bend the lock washer tab.
T
R
.
.
50 Nm (5.0 m · kg, 36 ft · lb)
T
R
.
.
75 Nm (7.5 m · kg, 54 ft · lb)
