Yamaha WR250F(P), Owner'S Service Manual

Page: 548 / 694

5 - 39
CHAS
FRONT FORK
26. Tighten:
●
Front fork cap bolt (locknut) 1
NOTE:
●
While compressing the fork spring, set the
thin type spanners
2 between the spacer 3
and spring guide 4 .
●
Hold the locknut 5 and tighten the front fork
cap bolt with specified torque.
T
R
.
.
29 Nm (2.9 m · kg, 21 ft · lb)
27. Install:
●
Front fork cap bolt 1
To outer tube.
NOTE:
Temporarily tighten the cap bolt.
28. Install:
●
Protector guide 1
Installation
1. Install:
●
Front fork 1
NOTE:
●
Temporarily tighten the pinch bolts (lower
bracket).
●
Do not tighten the pinch bolts (upper bracket) yet.
2. Tighten:
●
Front fork cap bolt
1
3. Adjust:
●
Front fork top end
a
* For EUROPE
** For AUS, NZ and ZA
Front fork top end (standard)
a
:
5 mm (0.20 in)
* 8 mm (0.31 in)
** 10.5 mm (0.41 in)
T
R .
.
30 Nm (3.0 m · kg, 22 ft · lb)