Yamaha WR250F(P), Owner'S Service Manual

Page: 486 / 694

5 - 8
CHAS
EC5251A0
Rear wheel
1. Install:
●
Bearing (right) 1
●
Circlip 2
●
Spacer 3
●
Bearing (left) 4
●
Oil seal 5
NOTE:
●
Apply the lithium soap base grease on the
bearing and oil seal lip when installing.
●
Install the bearing with seal facing outward.
●
Use a socket that matches the outside diam-
eter of the race of the bearing.
●
Right side of bearing shall be installed first.
●
Install the oil seal with its manufacture’s
marks or numbers facing outward.
CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
2. Install:
●
Brake disc 1
●
Bolt (brake disc) 2
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
T
R
.
.
14 Nm (1.4 m · kg, 10 ft · lb)
3. Install:
●
Rear wheel sprocket 1
●
Bolt (rear wheel sprocket) 2
●
Washer (rear wheel sprocket) 3
●
Nut (rear wheel sprocket) 4
NOTE:
Tighten the nuts in stage, using a crisscross
pattern.
T
R .
.
42 Nm (4.2 m · kg, 30 ft · lb)
FRONT WHEEL AND REAR WHEEL