Yamaha WR250F(P), Owner'S Service Manual

Page: 178 / 694

3 - 6
INSP
ADJ
COOLANT REPLACEMENT
CAUTION:
Take care so that coolant does not splash
on painted surfaces. If it splashes, wash it
away with water.
1. Place a container under the engine.
2. Remove:
●
Seat
●
Left side cover
Refer to ”SEAT FUEL TANK AND SIDE
COVERS” section in the CHAPTER 4.
3. Disconnect:
●
Coolant reservoir hose 1
Drain the coolant completely.
4. Connect:
●
Coolant reservoir hose
LOW
FULL
COOLANT
1
5. Remove:
●
Coolant drain bolt 1
6. Remove:
●
Radiator cap
Drain the coolant completely.
7. Clean:
●
Cooling system
Thoroughly flush the cooling system
with clean tap water.
8. Install:
●
Copper washer
●
Coolant drain bolt
9. Fill:
●
Radiator
●
Engine
To specified level.
Recommended coolant:
High quality ethylene glycol
anti-freeze containing
anti-corrosion for
aluminum engine
Coolant 1 and water
(soft water) 2 mixing ratio:
50%/50%
Coolant capacity:
1.3 L (1.14 Imp qt, 1.37 US qt)
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)