Optional Large Envelope Kit Installation Instructions
1. To install the parts A and B, refer to
2. Fasten the screws to the side guide on the rear side to fix part C.
Fasten the screws to the side guide on the front side to fix part D.
Caution:
If the screw is not tightened fully, it can come off and hit the transport device,
which can result in breakage of the transport device.
3. Attach part E to the end guide, at the short edge of the paper. Place part F1 or F2 along the wall
on the leading edge of the paper. Verify that the parts are firmly fixed.
Loading Envelopes Using the Optional Large Envelope Kit
1. Pull out the tray toward you until it stops.
2. Remove any paper remaining in the tray.
3. Attach or remove the shutter from the Postcard Kit or Large Envelope Kit, depending on the size
of the envelopes.
180
