7. Select the following:
• The paper tray (if applicable)
• The desired test print quantity
• The desired
Front Print Density
setting
• The desired
Back Print Density
setting (if the
2 Sided
option was selected)
•
Long Edge Feed
or
Short Edge Feed
8. Select
Start
.
An Information window displays stating
Test Print in Progress
.
Upon completion of the test prints, the Tray [1-3, 5, 6-7, 8-9] Paper Curl Correction Test Print
window reopens.
9. Retrieve the test prints from the output area of the press.
10. Review the output and choose one of the following:
• If paper curl still exists on the output:
1. Select another curl correction setting (
2. Repeat
through
3. Review the output and if paper curl still exists, repeat these steps again.
4. If the output still contains too much paper curl, change the print density or type of paper
used. If the results are still unsatisfactory, contact your Customer Support Center for
further assistance.
• If the output is acceptable, perform the following:
1. To save the selections or settings and close the Paper Curl Correction Test Print window,
select
OK
.
2. To save the selections or settings and close windows until only the Stock Library screen or
the Trays screen remains open, continue to select
OK
.
PPrrooffiilleess
The Profiles feature allows you to create and customize various profiles.
Alignment Profiles
Alignment Profiles allow you to position the output image to accommodate for misalignment or
skew. The profiles are used at the point of need for specialized print jobs.
Fold Adjustment Profiles
The Fold Adjustment feature allows you to adjust the fold position for various paper types, and set
adjustment values to various default types.
The Fold Adjustment feature is available when the press is connected to one of the following:
• For Bi-Fold or Single Fold options, an optional booklet maker finisher
• For C and Z Fold options, an optional finisher and the C/Z Folder device
122
