6. Select
Start
.
The press prints the test targets, measures them, and automatically adjusts the dry ink/toner
density for consistent application across the page.
Note:
The printed sheets do not yet reflect the new settings but are the sheets that were
used to make the adjustments.
7. Decide if you want to visually check the new settings:
• If you do
not
want to print sheets with the revised settings, select
Save
and
Close
.
• If you
do
want to print sheets with the revised settings, select the
Sample Printout
button to
view the adjustment prints.
Sample sheets print using the updated settings.
8. Check the printed samples for density uniformity and consistency.
• Verify that each line of color shows even density across the page, as shown in the following
illustration:
* Check for uniform, consistent density across all color bars as indicated by the arrows in the
above illustration.
If acceptable, select
Save
and
Close
.
• If the results are not acceptable, repeat the previous steps of this procedure.
9. Select
Close
to complete the Density Uniformity Adjustment.
RReeppllaacciinngg C
Coonnssuum
maabbllee SSuupppplliieess
Note:
Refer to
for the latest consumable part numbers.
The following items are the Customer Replaceable Units (CRU) for the press. It is recommended that
you have a supply of these items available to eliminate down time when they need to be replaced.
• Dry Ink/Toner cartridges (C, M, Y, K)
• Drum cartridges (C, M, Y, K)
• An empty Waste Dry Ink/Toner bottle
• Trays 5–9 feed rolls
• Suction Filter
248
