Correcting the Paper Curl
1. Perform one of the following:
• Copy an existing stock entry. Refer to
.
• Modify or edit an existing stock entry. Refer to
Editing an Existing Stock in the Stock Library
.
2. From the Stock Properties window, select and modify the stock attributes as required, including
entering a new or revised stock name, selecting a stock size, color, and other attributes.
3. Select the
Advanced Setup
button.
The Advanced Stock Setup window opens.
4. Select
Edit Settings
for the desired Paper Curl Correction option for
1 Sided-Face Up
,
1 Sided-
Face Down
, or
2 Sided
as required.
The Tray [1-3, 5, 6-7, 8-9] Paper Curl Correction Test Print window opens for the selected 1-sided
or 2-sided option.
5. Select the desired curl correction setting:
•
Default
•
Type A
•
Type B
•
Type C
•
Custom Curl Correction
:
• Severe (Large) Upward
• Medium Upward
• Moderate (Small) Upward
• Slight (Very Small) Upward
• No Curl
• Slight (Very Small) Downward
• Moderate (Small) Downward
• Medium Downward
• Severe (Large) Downward
Important:
If selecting one curl correction setting does not correct the paper curl, then
select another setting. It may take several attempts to correct the paper curl. Therefore, it
is recommended that you use the curl correction settings in the sequential order listed in
Recommended Order for Using Paper Curl Correction Test Print Options
6. Select
Test Print
.
The Test Print - Paper curl correction Tray [1-3, 5, 6-7, 8-9] window opens with secondary test print
options.
121
