Number
Description
4
Select this setting (
+1 / High / High 1
) when you want a greater amount of
pressure applied to the spine of the booklet, but not as much as the +2 setting
uses.
5
Select this setting (
+2 / Higher / High 2
) when you want the most amount of
pressure applied to the spine of the booklet. The more pressure applied, the more
square the booklet spine will be. The greatest amount of pressure that can be
applied to the booklet is +2.
Booklet Example
The following illustration shows two different booklet types:
1. This booklet is not square-folded; it has a rounded, thicker appearance to the spine.
2. This booklet is square-folded; the booklet spine is flattened and squared, giving a perfect-bound
book appearance.
Trim Feature
Access the trim feature from your computer print driver or from the print server.
Trim Options
When using the trim options, always consider the following:
• Booklets exiting the SquareFold
®
Trimmer device can contain trim remnants or scraps from the
previously trimmed booklet. Static electricity causes this build-up and it is normal. If booklets
contain trim remnants, simply remove and discard them.
• The trim feature can be switched on or off. When the feature is on, you can adjust the trim setting
in 0.1 mm (0.0039 in.) increments depending on your requirements for the finished booklet job.
The trim options include the following:
•
Trimming On/Off
: Switch
On
/
Off
the Trimming feature. The default setting is
Off
.
•
Cut to Size
: Use the
Left/Right Arrow
buttons to decrease or increase the trimmer setting.
Adjustments are made in 0.1 mm (0.0039 in.) increments.
229
