Long Edge Feed or Short Edge Feed
Select the feed direction of the media loaded in the selected tray.
Front Print Density Level
This option is available for
1 Sided-Face Up
,
1 Sided-Face Down
, and
2 Sided
.
• Enter the desired print (dry ink/toner) density amount as required.
• Density amount should match approximately with the image density on the target prints.
• Density amounts range from 0–70%.
•
If your output is a high dry ink/toner coverage area on the output, you may want to enter a
higher print density amount.
• The system default value is 10%.
Back Print Density Level
This option is available only for
2 Sided
prints.
• Enter the desired print (dry ink/toner) density amount as required.
• Density amount should match approximately with the image density on the target prints.
• Density amounts range from 0–70%.
•
If your output is a high dry ink/toner coverage area on the output, you may want to enter a
higher print density amount.
• The system default value is 10%.
Recommended Order for Using Paper Curl Correction Test Print Options
Important:
Paper jams and wrinkled output occurs if the options are not used in the
recommended order. For example, use
Default
and then skip to
Type C
).
The recommended, sequential order for selecting and using the various test print settings for paper
curl correction is :
1.
Default
2.
Type A
3.
Type B
4.
Type C
5.
Custom Curl Correction
:
Slight (Very Small) Upward
or
Slight (Very Small) Downward
6.
Custom Curl Correction
:
Moderate (Small) Upward
or
Moderate (Small) Downward
7.
Custom Curl Correction
:
Medium Upward
or
Medium Downward
8.
Custom Curl Correction
:
Severe (Large) Upward
or
Severe (Large) Downward
9. If paper curl still persists after trying several or all of these settings, try decreasing the image
density on the print job or use a different type of paper.
If paper curl is still a problem, contact the Customer Support Center for further assistance.
120
