For defects running from the lead-edge to trail-edge (LE/TE) direction, refer to
Solution
Measure the frequency of the spot intervals:
• Acquire the measuring tool either from
www.xerox.com/VERSANT_4100docs
or from the
Nationalization Kit
.
• Using the measuring tool, measure the intervals of the defects.
• If the defect is at the interval of 37.5 mm or 147 mm, replace the appropriate drum cartridge.
Refer to
• If the defect is at the interval of 154 mm, replace the pressure roll assembly. To replace the
pressure roll assembly, contact your Xerox Technical Customer Support.
• If the defect is at the interval of 375 mm, replace the fuser assembly. To replace the fuser
assembly, contact your Xerox Technical Customer Support.
C
Coolloorr N
Noonnuunniiffoorrm
miittyy oonn PPrriinnttss
Problem
The print has variations in color uniformity, such as:
• Uneven density
• Light or dark areas running from the side-to-side direction (inboard-to-outboard)
• Color shift or inconsistent color throughout the page
302