Paper Types
You can use this product to print on both recycled and virgin paper, approved to an environmental
stewardship scheme, which complies with EN12281 or a similar quality standard. Lighter weight
paper (60 g/m
2
), which contains less raw material and thus saves resources per print, can be used in
certain applications. We recommend you to check if this is suitable for your printing needs.
ENERGY STAR
The ENERGY STAR program is a voluntary scheme to promote the development and purchase of
energy-efficient models, which help to reduce environmental impact. Details on the ENERGY
STAR program and models qualified to ENERGY STAR can be found at the following website:
The ENERGY STAR and ENERGY STAR mark are registered United States trademarks.
The ENERGY STAR Imaging Equipment Program is a team effort between United States,
European Union, Japanese governments, and the office equipment industry to promote energy-
efficient copiers, printers, fax, multifunction printers, personal computers, and monitors.
Reducing product energy consumption helps combat smog, acid rain, and long-term changes to
the climate by decreasing the emissions that result from generating electricity.
For more information on energy or other related topics, go to:
•
or
•
www.xerox.com/environment_europe
Power Consumption and Activation Time
The amount of electricity that a device consumes depends on the way the device is used. This device
is designed and configured to enable you to reduce your electricity usage.
Power Saver modes are enabled on your device to reduce energy consumption. After the last print,
the device goes to Ready mode. In this mode, the device can print again immediately. If the device is
not used for a specified period, the device goes to Low Power mode, then to Sleep mode. In these
modes, to enable reduced-power consumption, only essential functions remain active. The device
takes longer to produce the first print after it exits the Power Saver modes than it takes to print in
Ready mode. This delay is the result of the system waking up and is typical of most imaging devices
on the market.
To save power, you can enable Auto Power Off mode on your device. If Auto Power Off mode is
enabled, you can configure the mode as follows:
•
Always Allowed
: The device powers off automatically after the specified time, and the cumulative
Low Power mode and Sleep mode time outs have elapsed.
•
Allowed ONLY When the Conditions are Met
: The device automatically powers off only after
time outs have elapsed. The device also powers off if USB Drive, and Wired and Non-Wired
Network are not activated.
To change the Power Saver settings, refer to the
User Documentation
at
. For more details, contact your System Administrator or refer to the
System Administrator
Guide
.
To enable Auto Power Off mode, contact your System Administrator. For details, refer to the
System
Administrator Guide
at
www.xerox.com/VERSANT_4100docs
To learn more about Xerox participation in sustainability initiatives, go to:
25
